Home > News > Industry News

How to use portable car air pump?



A portable car air pump is a very practical car accessory that can help us inflate or deflate tires easily and quickly in an emergency. At the same time, it is also very convenient to carry and can be inflated anytime and anywhere. In this article, we’ll take a closer look at how to use a portable car air pump.


Before using the portable car air pump, we need to do some preparations for it. First, you need to make sure that the port of the air pump cable matches the car's power outlet to avoid overloading the circuit or making it unusable. Secondly, check whether the accessories of the air pump, such as the air nozzle, cables, etc. are complete. Finally, it is necessary to confirm the standard air pressure value of the wheels to fully ensure the normal operation of the tires.

Correct operating procedures

In actual operation, we need to follow the following steps to use the portable car air pump correctly:

Step 1: Connect the inflation nozzle to the tire valve opening to ensure a tight fit.

Step 2: Select the air nozzle that is compatible with the vehicle's air nozzle port from the air pump accessories and install it.

Step 3: Start the air pump and adjust the required air pressure value as required.

Step 4: If there is a pressure gauge inside the air pump, stop the power supply to the air pump immediately when the pressure reaches the required value.

Step 5: When the air pump is not equipped with a pressure gauge, you need to make correct judgments based on common sense or the tools at hand, and control the inflation time by yourself.

Step 6: After using the air pump, we need to unplug the air port and power supply in time, and clean and maintain the air pump.


When using a portable car air pump, you need to pay attention to the following points to ensure safe and effective operation.

1. In order to avoid safety accidents, we cannot place the air pump on the tire in use during operation to prevent the pump body from being absorbed by the tire, causing pump body failure or other accidents.

2. Long-term use of the air pump may cause it to overheat, so after the operation is completed, it is recommended to take a short rest to keep it in good condition.

3. During the inflation process, it is necessary to observe whether the air pressure reaches the predetermined value in time, and stop inflation in time when the target air pressure value is reached to avoid tire blowout or over-pressurization of the wheel.

The portable car air pump is a very convenient and practical car tool. It can save us time and energy and help us solve some tire inflation problems. During use, we need to ensure that the corresponding preparations have been completed, and at the same time adhere to the correct inflation operation procedures and precautions to ensure safe and effective operation.

We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept